repair,service,install,maintain,tools,handtools,TOOLKITS,toolkits,technician,ENGINEERS,TECHS,field service,hand tools,TOOL KITS,tool kits,technicians,engineers,tecs,fieldservice,installations,tool box,repair,service,install,maintain,tools,installers,depot
Order InfoCompany InfoContact Info


 Kit Options: Digital Multimeters
Digital Multimeters
Linemans Butt-In Handsets
Network and Cable Testers
 Cordless Power Screwdriver
3M Electronics Vacuum



FLUKE 87-V True RMS Digital Multimeter
The FLUKE 87-V DMM features a lifetime guarantee Limited Lifetime Warranty
True-RMS AC Voltage and Current
Built-In Thermometer

FLUKE Has Done It Again
Accuracy and diagnostic functions for maximum industrial productivity.

The new Fluke 87V has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment.

The 87V operates very similar to the classic 87, but with more problem solving power, safety, convenience and impact protection.

FEATURES:
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
• Large digit display with bright, two-level backlight makes the 80 Series V significantly easier to read than older models
• True-RMS AC voltage and current for accurate measurements on non linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives
• 4-1/2 digit mode for precise measurements (20,000 counts)
• Measure up to 1000 V AC and DC
• Measure up to 10 A, 20 A for up to 30 seconds
• Built in thermometer lets you carry one less tool (TC probe included)
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity and diode test
• 10,000 ΅F capacitance range for components and motor caps
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Peak capture to record transients as fast as 250 ΅s
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph for fast changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks
• Improved selectable sleep mode for long battery life
• Access door for fast battery changes without breaking the calibration seal
• New removable holster with built in test lead and probe storage
• Limited Lifetime warranty

Fluke 87 V DMM Specifications
Measurement
Range
Accuracy
Voltage (DC)
0.1mV-1000V
±.05%+1
Voltage (AC)
0.1mV-1000V
±.7%+2
Current (DC)
0.01uA-10A
±0.2%+2
Current (AC)
0.01uA-10A
±1.0%+2
Resistance
400W-50MW
±.2%+1
Capacitance
9,999uF
±1.0%+2
Frequency
0.5Hz-200 kHz
±.005%+1
Temperature
Measurement
-200.0°C to 1090°C
-328.0°F to 1994.0°F
80 BK
Temperature Probe
-40 °C to 260 °C
-40 °F to 500 °F
Conductance
60.00 nS
± 1.0%+10
Operating
Temperature
-20 °C to 55 °C
Storage
Temperature
-40 °C - 60 °C

The Fluke 87 Series V digital multimeter has a lifetime warranty and includes TL75 test leads, AC72 Alligator Clips, Holster, 9V battery (installed), Getting Started Manual, and CD with detailed manual. 87V includes an 80BK temperature probe.

The new 80 series V are independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

NIST Traceable Calibration Certificate for Fluke 175, 179, and 87 Digital Multimeters is available for $65 per SVC Calibration Certificate. Call 800-284-0808 to order.

37387 FLUKE 87-V True RMS Digital Multimeter $399.95


FLUKE 175 and 179 Multimeters
Fluke 170 Series Multimeters Factory LIFETIME WARRANTY
Meets IEC 1010 Safety Standards
Easy-to-read display with larger digits

Smart, Safe and Tough!
The New 170 Series Fluke Digital Multimeters are all three. And, no other meters offer such performance at such a great price. Introducing Fluke 175 & 179 Series Digital Multimeters, Fluke's smartest, safest and toughest meters inside and out.

These meters are internally tough with fused current inputs, overvoltage protection and they even protect against measuring voltage if the knob is accidentally set on ohms. On the outside the rugged overmolded body armor case offers constant protection no matter how much you throw them around. For those with accuracy concerns the Fluke 170 series meters are more accurate than ever and have an easy-open battery door where the battery can be changed with out breaking the calibration seal, preventing unnecessary calibration charges.

For overvoltage protection against transient spikes up to 6 kV, and has the safety ratings to prove it. Protect yourself and your technicians working in dangerous environments like three-phase distribution systems such as: single phase commercial lighting, equipment in fixed installations like switch gear and polyphase motors, bus and feeder in industrial plants, lighting systems in larger buildings and appliance outlets with short connections to the service entrance.

Fluke 179 DMM Specifications
Measurement
Range
Accuracy
Voltage (DC)
0.01mV-1000V
±0.09%
Voltage (AC RMS)
0.01mV-1000V
±1.5%
Current (AC/DC)
0.001mA-10A*
-
Resistance
0.01-50MOhms
±.09%
Capacitance
0.1nF-9,999uF
±1.2%
Frequency
2Hz-30kHz
±0.1%
*10A continuous
Fluke 175 DMM Specifications
Measurement
Range
Accuracy
Voltage (DC)
0.01mV-1000V
±.15%
Voltage (AC RMS)
0.01mV-1000V
±1.5%
Current (AC/DC)
0.001mA-10A*
-
Resistance
0.01-50MOhms
±.09%
Capacitance
0.1nF-9,999uF
±1.2%
Frequency
2Hz-30kHz
±0.1%
*10A continuous

With all the features and functions you have come to expect from a quality FLUKE product:
True RMS For accurate readings, even around harmonics.
Touch Hold ® - automatically captures the measurement, beeps, and locks it on the digital display for later viewing.
Auto/Manual Range - automatically picks the correct range for the measurement.
Intergrated overmolded case takes the bumps and protects your meter.
40% larger high contrast display with extra large characters to be easy to read from a distance.

And all the other great features:
Continuity Beeper, Capacitance, Diode Test, Fused Current Inputs, Volts, Amps, Resistance, Frequency Counter, and Sleep Mode to prolong battery life.

Of all those great features, the one that stands out, is the FLUKE LIFETIME WARRANTY, which keeps your FLUKE 170 series meter up and running.

37375 FLUKE 175 Digital Multimeter
Every bit the meter the 179 is but without temperature measurements and a backlight. The 175 features a 6000 count resolution, .15% accuracy, Min/Max/Average, True-rms, ac voltage and current and is CAT IV rated. Also Touch Hold ©, continuity beeper, diode test, volts, amps, resistance and sleep mode, Includes test leads, 9 volt battery and a Lifetime Warranty.
$279.95
37376 FLUKE 179 True RMS Digital Multimeter
The 179 is loaded with features including temperature measurements in CΊ and FΊ (Thermocouple included) and a backlight for measurements in low visibility environments. Accurate even when harmonics are present, true RMS, automatic Touch Hold ©, auto/manual range, Lo Ohms with zero calibration, continuity beeper, capacitance, diode test, volts, amps, resistance, frequency counter and sleep mode, 6000 count resolution with bargraph. Includes test leads, 9 volt battery and a Lifetime Warranty.
$299.95


The full featured Wavetek 35XP auto-ranging DMM is budget friendly. Wavetek 35XP Digital Multimeter
Low Cost
Reliable and Rugged
Auto-ranging

Full Featured yet Economical
The new 35XP is the low-cost solution in performance, auto-ranging DMMs. This meter is encased in a small, popular XL size package and offer excellent 0.5% accuracy. Its higher resolution, large character, 4000-count digital and 32-segment analog bargraph display assures maximum readability.

 
Wavetek 35XP Multimeter Specifications

MeasurementRangeAccuracy
Voltage (DC)320mV - 600V±.5%
Voltage (AC)3.2mV - 600 ±.2.0%
Current (DC)320΅A-10A ±.2.5%
Current (AC)320΅A-10A ±.2.5%
Resistance320* - 30M*±.1.5%
Capacitance32nF - 32mF±.5.0%
Continuity<20* 
Diode Test3.2VDC/0.6mA 
 
Meters include measuring functions for DC and AC Voltage, DC and AC current, resistance from 320 ohms to 40 Mohms, diode test, continuity test and temperature range from -20°C to 1000°C (-4°F to 1832°F). The 35XP also has capacitance measuring capability and features fully-fused current input jacks, incorrect input warning, 10 minute auto-off and data hold button. Safety test leads, battery, operator’s manual, extra fuse and Magna-Grip holster are included. This 6.5-ounce meter measures 6" x 2.75" x 1.3" and comes with a one-year warranty.
37335 Wavetek 35 XP Digital Multimeter $110.00


FLUKE Volt Alert Voltage Indicator
Checks For Live Voltage
Quickly test cables for common wiring problems Helps Ensure Safety
No Contact Necessary

Instantly check to see if voltage is present before starting work. Simply touch the plastic tip to a wire or outlet, if the tip glows red AC voltage is present. 5.5" long and includes pocket clip. Made in the USA.

37105 FLUKE Volt Alert Voltage Indicator
$29.95


Field Service Tool Kits | Fiber Optic Tool Kits | Telecom Tool Kits | Network/LAN Tool Kits
Computer Tool Kits | Plant Maintenance Tool Kits | Copier/Office Tool Kits
Biomedical Tool Kits | Tailor-Made Tool Kits
Contact Us | justTOOLKITS.com Info | Terms
Shopping Cart | Search